How to choose an embroidery area

Choose an embroidery field that fits your complete design and the required frame. The listed maximum field alone does not establish cap compatibility or garment clearance.

Read both dimensions

Compare both dimensions of the design with the field. The catalogue uses Y and X in some labels, so preserve the quoted dimension order and confirm orientation before ordering.

Distinguish a model from its area option

WN-MT1501L appears with 500 × 800 mm and 500 × 1200 mm fields. WN-C1501L appears with 500 × 1200 mm and 700 × 1200 mm fields. Use model plus area on your inquiry and order.

Confirm the usable field for the attachment

A maximum flat field does not establish the usable cap embroidery area. Ask for the cap driver, frame size and suitable product dimensions. Test thick, curved or unusual materials before committing.

Check access and packing

Use packing dimensions when planning delivery access, then ask for the installed footprint and service clearance. Packaging size and machine working dimensions are different measurements.

Source: WEINUOX standard configuration catalogue dated 28 Apr 2026. Content reviewed 22 Oct 2026. Confirm the selected configuration in your written quotation. General selection guidance is editorial advice, not a machine performance test.